DVD players.
Models.
The models studied here are the Proline 1250, 1260 and 1350. These are generally
available from Comet electrical stores across the UK.
Worth fixing?
These models retail at around 20 to 30 Pounds in the retail outlets. While this
low price may normally rule out repair, a good fast turnover can make it
worthwhile... as long as you are able to sell them on.
So, for the figures:
From a standing start, never having seen these models before, there is no reason
why you should not be able to fix 25 or more per day. As you get used to them, you
can seriously increase this as they are common faults.
Components should not come to much.
How it went for me.
I got around 95% of the DVD players I looked at working without buying in any
parts.
I have to admit, there was a little cheating there. The odd unit arrives with
the case damaged, so can be used for components to get others going. Often this
can be as simple as changing a complete DVD deck, a quick enough job.

Taking into account the cost of all units, including the scrappers, a good day's
repairs can make around 200 Quid profit. The only question then is the time
selling them on.
Warning!.
Once the cover is off, the power supply is open and it is very possible to touch
the mains side of the power supply.
Please take great case when working on this kind of equipment, as the low voltage
circuits van make you forget all about the mains supply just waiting to get you.
Be sure to unplug supply before opening the cover on any mains equipment.
Reasons for return: 1250.
With the 1250s, very few were faulty. Why, I hear you ask, were they returned. Well,
I am glad you asked that.
Two words come to mind... warranty fraud.
Many consumers are returning products, claiming them to be faulty, just to get money
back or a new player. The clues are often there to be seen in the return note, timing
and poor excuses like "doesn't work properly".
The shop doesn't check, time is money and they do not want to offend customers, so
they have a no quibble replacement policy that guarantees the cheat a new player
at any time within the first year.
Reasons for return: 1260.
For the 1260, the most common fault was no eject. A faulty motor (on the right hand
side in the picture) is usually to blame. This can sometimes be fixed, without
even taking the motor apart. The other option is to take a motor from one of the
scrap units.
Another common problem was the remote not working. Usually a simple case of solder
where it should not be - across connections.
Reasons for return: 1350.
The 1350s are a real strange one, faulty operator. Blank blue screen, not even
the DVD screen appearing on power up. To be fair, the manufacturer made it simple for
the user to hit the wrong button on the remote control. This was bad enough, but the
instructions in the manual do not correctly explain how to recover the picture
after granny hit the wrong button.
The number of these returned with this problem just shows just how poor the
decision was to include a button on the remote which could kill the display on
most TVs.
Nice simple one, hit the button that they hit until you get the picture, then go
into the setup menu and reset all to standard. Job done.
This is not the only model of DVD where this happens, it has also been seen on the
1260. Same cure, hit the button to get a picture and go to setup.
Contact.
If you want to get your hands on returns such as these DVDs, CSC near Chesterfield
should have a selection of products including digital cameras and computer
equipment.
CSC usually deal in quantity to trade, but they can also be found on Chesterfield
market on a Thursday selling to the public. Shipping costs can make some items
too expensive in small quantities, unless you happen to be in that area and pick
some up.
Contact Steve on: 01246 476800 or (mobile) 0774 293 6677.